My HD Radio Receiver is impaired and not working correctly; what could be wrong?
Modified on: Tue, 8 Oct, 2019 at 11:07 AM
iBiquity Digital has determined that the “short” P3 Interlever can impair the operation of several types of radio receivers and that Exciters should be operated only using the “long” P3 Interlever setting.
Note: The default for BE products is set to “long”. However, to check your FSi 10, perform the following steps: Select ‘Signal’ from the main menu, then select ‘P3 Interleaver’ from the Signal menu. If the radio Button for “Short” is selected, change the selection to “Long” and press ‘OK’.